Changes

From Security Weekly Wiki
Jump to navigationJump to search
514 bytes added ,  14:44, 3 July 2007
no edit summary
Now, remove the DHCP configuration from the /etc/dnsmasq.conf, and replace it with:
 
 
xxxx
 
* Step 6 - Reboot the WRT54GL, make sure all is well. Now, connect the POE adapaters and place the APs where you want them.
 
* Step 7 - Configure Wireless - Place the access points on their respecitve channels using the command "nvram set wl0_channel=1". Ideally, you could have 3 APs, one on channel 1, 6, and 11. Now, set all of the SSIDs to the same value using the command "nvram set wl0_ssid="guestwireless".
 
In Part II, we will show you how to implement a captive portal for guest authentication.
2,337

edits

Navigation menu