From Security Weekly WikiJump to navigationJump to search
Wireless Guest Network
- 2 WRT54GLs
- 2 LINKSYS POE Adapter WAPPOE12 12V
- OpenWrt "Whiterussian" 0.9
- Step 1 - Unbox and flash the routers. For the WRT54GL, you must use the web interface to put the initial OpenWrt image on them. (Question, why does Linksys not enable boot_wait by default?). Also, do not use the PoE adapters when flashing!
- Step 2 - Change the IP address of the routers, enable boot_wait, and set the hostname:
nvram set lan_ipaddr="10.10.10.5" nvram set boot_wait="on" nvram set wan_hostname="myap1"
- Step 3 -